FLU1-40-2AD - AULT / SL POWER FLU1-40-2AD OPEN-FRAME SWITCHING POWER SUPPLIES...
- Part Number:
- FLU1-40-2AD
- Model Number:
- FLU1-40-2AD
- Make:
- AULT / SL POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
AULT / SL POWER FLU1-40-2AD OPEN-FRAME SWITCHING POWER SUPPLIES Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0% Minimum Load Requirement
- 2-Year Warranty
- Austel CCL Certification
- BABT Approvals
- CEMark: UL/CSA/EN60950 Approvals
- EN55022/FCC Class B Input Line Filter
- Medical Safety Approvals
- Minimum 200,000-Hour MTBF
- Models with UL544/CSA C22.2-601/EN60-601
- Over-Current/Short-Circuit Protection
- Single, Dual and Triple Output Models
- Universal AC-Input and DC-Input Models
Specifications
- Altitude: 0 to 10,000 feet.
- Continuous Output Power: 40W, maximum.
- Cooling: Convection cooling is adequate.Moving air is recommended for operation in a confined area.
- DC Output: See table. (Note 2.)
- Design Topology: Flyback converter with current-mode control.
- Efficiency: 62-75%, typical (nominal input line voltage, nominal load conditions).
- EMI Filter: Standard. Performance surpasses conducted EMI requirements of EN55022/FCC Class B by 10 dB, typ.
- Frequency of Operation: 40 kHz (fixed).
- Hi-Pot Isolation: FLU Series: 5300 VDC, input-to-out-put for one minute. (Note 3.)
- Hold-Up Time: FLU and MDU models: 16 ms (115VAC input), 32 ms (230 VAC input),minimum, at full load
- Input Line Frequency: 47-440 Hz (ac input models).
- Input Line Protection: MOV transient protected (FLU and MDU series). Input line fuse provided on-board. (See Note 1.)
- Input Voltage: FLU and MDU models, universal input range 85-265 VAC single phase or 100-370 VDC. DC-input models, 36-75 VDC (48V, nominal).
- Leakage Current: MDU Series, non-patient contact rating: 500 µA, maximum.
- Mean Time Between Failures: >200,000 hours. (Note 6.)
- Noise, Ripple and Spike: 1% peak-to-peak, maximum. (See Note 5.)
- Output Power De-Rating: De-rate output power and current linearly 2%/°C from +50°C to +70°C.
- Output Voltage Adjust: Primary output adjustable ±5%.Auxiliary outputs fixed.
- Over-Voltage Protection: Primary output only.
- Overload Protection: Power-limit circuit.
- Relative Humidity: 0 to 95%, non-condensing.
- Short-Circuit Protection: Continuous.
- Soft Start: Standard on all models.
- Storage Humidity: 0 to 95%, non-condensing.
- Storage Temperature: -40°C to +85°C.
- Temperature Coefficient: ±0.05%/°C over the entire operating temperature range.
- Temperature Range: -20°C to +70°C.
Applications
- None Available
Aliases
- None Available
Related Items
F35050400A000G
2W AC/DC Linear Power Supply (UK)- F41050750A000G
3.75W AC/DC Linear Power Supply (UK) - F48051800A000G
9W AC/DC Linear Power Supply (UK) - F35060200A000G
1.2W AC/DC Linear Power Supply (UK)