FDA1-150-1BD - Ault/SL Power FDA1-150-1BD Power Supply - 150W AC/DC Switch-Mode Power...
Request Quote
For Price
- Part Number:
- FDA1-150-1BD
- Model Number:
- FDA1-150-1BD
- Make:
- AULT / SL POWER
- Lead Time:
- Available
- Qty In Stock:
- Available
Ault/SL Power FDA1-150-1BD Power Supply - 150W AC/DC Switch-Mode Power Supply Simple Type: Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 0% Minimum Load Requirement
- 1.38-Inch Overall Height
- 150W Continuous Output Power
- 90-265 VAC Auto-Ranging Input
- EN55022/FCC Class B Input Line Filter
- Minimum 165,000-Hour MTBF
- Optional Power-Fail Warning
- Over-Voltage/Over-Current/Short-Circuit Protection
- Remote Load Sensing
- Single and Dual Output Models
- UL1950/CSAC22.2-950/EN60950 Standards
Specifications
- Altitude: 0 to 10,000 feet
- Continuous Output Power: 150W, maximum
- Cooling: Convection cooling is adequate. Moving air is recommended for operation in a confined area
- Design Topology: Forward converter with current-mode control
- Efficiency: 70%, typical (115 or 230 VAC input)
- Electrical Strength/Isolation: 5300 VDC, input-to-output for one minute
- EMI Filter: Standard. Performance surpasses conducted EMI requirements of EN55022/FCC Class B by 10 dB, typ
- Frequency of Operation: 65 kHz (fixed)
- Hold-Up Time: 16 ms at 115 VAC input, 32 ms at 230 VAC input, minimum at full load
- Input Current: 3.5A, maximum
- Input Line Frequency: 47-440 Hz (50/60 Hz, nominal)
- Input Line Protection: MOV transient protected. Input line fuse provided on-board
- Input Voltage: Auto-ranging input, 90-265 VAC, single phase
- Mean Time Between Failures: >165,000 hours
- Noise, Ripple and Spike: 2% peak-to-peak, maximum
- Output Power De-Rating: De-rate output power & current linearly 2%/°C from +50°C to +70°C
- Output Voltage Adjust: Primary output adjustable ±5%. Auxiliary outputs fixed
- Over-Voltage Protection: Primary output only (120% of rated output voltage, typical)
- Overload Protection: Power-limit circuit
- Power-Fail Warning: Optional: TTL-compatible (logic 0, 4 ms, minimum, before loss of output)
- Relative Humidity: 0 to 95%, non-condensing
- Short-Circuit Protection: Continuous
- Soft Start: Standard on all models. Prevents output overshoot and power transformer saturation at start-up
- Storage Humidity: 0 to 95%, non-condensing
- Temperature: Operating:-20°C to +70°C; Storage:-40°C to +85°C
- Temperature Coefficient: ±0.05%/°C over the entire operating temperature range
- Transient Response: 4 ms recovery to within 1% of the regulation band with no more than 5% deviation
Applications
- None Available
Aliases
- None Available